Installation Method Of CNC Lathe

Lifting and transportation
The lifting and positioning of the machine tool should be carried out using specialized lifting tools provided by the manufacturer, and other methods are not allowed. No special lifting tools are required, and steel wire ropes should be used to lift and position according to the specified parts in the manual.
Foundation and location
The machine tool should be installed on a solid foundation and positioned away from the vibration source; Avoid sunlight and thermal radiation; Place in a dry place to avoid the influence of moisture and airflow. If there is a vibration source near the machine tool, anti vibration trenches must be set up around the foundation.
Installation of machine tools
The machine tool should be placed on the foundation and leveled in a free state, and then the foundation bolts should be evenly locked. For ordinary machine tools, the level reading should not exceed 0.04/1000mm, and for high-precision machine tools, the level reading should not exceed 0.02/1000mm. When measuring installation accuracy, it should be carried out at a constant temperature, and the measuring tool should be used after a certain period of constant temperature. When installing the machine tool, every effort should be made to avoid the installation method that causes forced deformation of the machine tool. When installing a machine tool, certain components of the machine tool should not be removed casually. The disassembly of these components may lead to a redistribution of stress within the machine tool, thereby affecting the accuracy of the machine tool.