CNC Lathe Tooling Lathe

Determine the processing route
The machining route refers to the trajectory and direction of the tool relative to the part during the machining process of a CNC machine tool.
1. It should be able to ensure machining accuracy and surface roughness requirements;
2. Efforts should be made to shorten the processing route and reduce the tool idle travel time.
The Relationship between Processing Route and Processing Allowance
Under the condition that CNC lathes have not yet reached widespread use, it is generally necessary to arrange excessive allowances on the blank, especially those containing forged or cast hard skin layers, for processing on ordinary lathes. If it is necessary to use a CNC lathe for machining, it is necessary to pay attention to the flexible arrangement of the program.
Key points for fixture installation
The connection between the hydraulic chuck and the hydraulic clamping cylinder is achieved by a pull rod. The key points for clamping the hydraulic chuck are as follows: first, use a handle to remove the nut on the hydraulic cylinder, remove the pull tube, and extract it from the rear end of the spindle. Then, use a handle to remove the chuck fixing screw to remove the chuck.