Die Cast Concrete Paver Stamping Molds For Sale

Shift paddles are a special type of gear shifting device that can be operated by shifting on the paddles behind the steering wheel, without the need to step on the clutch. This device is widely used in racing because the shift paddles are located behind the steering wheel, making it very convenient to use and greatly improving shifting efficiency.

Specifically, when using shift paddles to shift gears, it is necessary to first step on the brake pedal of the car, start and idle the car, then place the automatic transmission lever in position D, and finally move the shift paddles of the car's steering wheel to increase or decrease gears. In this way, the driver can quickly complete gear shifting operations without leaving the steering wheel with both hands, thereby better focusing on driving and controlling the vehicle.

In addition, the design of shift paddles also makes shifting operations more convenient and efficient. Drivers can distinguish different gears, such as reverse, low, high, etc., by using different markings and feel on the paddles. In this way, the driver can quickly switch between different gears without leaving the steering wheel, thereby better adapting to different driving needs.

In short, the reason why shift paddles can improve shifting efficiency is due to their convenient and efficient operation and shifting methods. These characteristics enable drivers to focus more on driving and controlling the vehicle, improving driving efficiency and safety.

Modification procedure

1. Power off

Before performing the VW 8 steering wheel shift shifters, we needed to power off the car to ensure safe operation. The specific steps are as follows:

(1) Find the main power switch of the car and turn it off;

(2) Wait for a period of time to ensure that all electrical equipment has been completely powered off.

2. Remove the original steering wheel

(1) Use a screwdriver to remove the screws on the steering wheel and remove the fixing screws on the steering wheel;

(2) Use a wrench to loosen the nut in the center of the steering wheel and remove the steering wheel from the steering wheel shaft;

(3) Carefully remove the original steering wheel from the steering wheel shaft.

3. Install the baffle plate

(1) Connect the baffle with the connecting line to ensure that the connection is firm;

(2) Fix the paddle on the steering wheel to ensure the correct position;

(3) Use a wrench to tighten the nut in the center of the steering wheel so that the shift plate is closely connected with the steering wheel.

4. Install the modified steering wheel

(1) Place the modified steering wheel on the steering wheel shaft;

(2) Use a wrench to tighten the nut in the center of the steering wheel and fix the modified steering wheel on the steering wheel shaft;

(3) Use a screwdriver to tighten the fixing screws on the steering wheel to ensure that the steering wheel is firm and not loose.

5. Switch on the power supply and test the switch function

(1) Turn on the main power switch of the car and turn on the power;

(2) Test the shifter function by gently pressing the finger on the shifter to confirm that the shift operation between the shifter and the transmission is normal.

4. Precautions

1. Make sure that the car is powered off to avoid electrical accidents when carrying out the Volkswagen 8 steering wheel shift shift;

2. When disassembling and installing the steering wheel, be careful and gently to avoid collision with the internal parts of the car;

3. Pay attention to safety when using tools to avoid personal injury;

4. When testing the shifter function, ensure that the car is in a stopped state to avoid accidents.

CONTACT US

Alex He

Tel:+86 15989331617

Whatsapp&Wechat:+86 15989331617

Skype ID:alex.ho43

Email: alex.he@innolead.net

Web:www.innolead.net

Hot Tags: die cast concrete paver stamping molds for sale, China die cast concrete paver stamping molds for sale manufacturers, suppliers, factory, Sheet Metal Fabrication Stamping, Cold Forging Progressive Stamping Appliances, Multiple Stamping Stations Bracket Parts, Silicone Rubber Hot Stamping