Customized Stainless Steel Metal Stamping Tooling

Introduction of stamping equipment

Stamping equipment is a kind of special equipment widely used in machinery manufacturing, automobile manufacturing, home appliance manufacturing and other industries. It is mainly used for stamping metal sheets into various shapes, such as car bodies, electrical shells and so on. The following is a detailed introduction to stamping equipment:

1. Type of stamping equipment

Stamping equipment is mainly divided into two types: mechanical punching machine and hydraulic punching machine. The mechanical press is driven by an electric motor, and the rotary motion of the motor is converted into the up and down motion of the punch by a crankshaft linkage mechanism. The hydraulic press uses the hydraulic system to make the punch move up and down through the control of the oil pump and the valve.

2. Stamping equipment features

Stamping equipment has the following characteristics:

(1) Fast stamping speed and high production efficiency;

(2) Simple operation, easy to achieve automated production;

(3) The metal sheet can be stamped in various shapes to meet various production needs;

(4) Suitable for mass production, reduce production costs.

3. Application range of stamping equipment

Stamping equipment is widely used in the following fields:

(1) Machinery manufacturing: such as automobile manufacturing, agricultural machinery manufacturing, machine tool manufacturing, etc.

(2) Automobile manufacturing: such as body manufacturing, auto parts manufacturing, etc.;

(3) Home appliance manufacturing: such as washing machine, refrigerator, air conditioning and other home appliance shell manufacturing.

4. Working principle of stamping equipment

The working principle of the stamping equipment is mainly to press the metal sheet through the punch to make it deform or separate. In the stamping process, the punch presses the sheet metal according to the preset mold shape, causing it to deform or separate, so as to obtain the desired product shape.

5. Safety operating rules for stamping equipment

In order to ensure the safe use of stamping equipment, the following safety operating procedures must be observed:

(1) Before the operation must be professionally trained, familiar with the structure and operation method of the equipment;

(2) Check whether the equipment is in normal condition, and deal with any abnormality in time;

(3) During operation, personal protective equipment such as protective glasses and gloves must be worn;

(4) It is forbidden to put hands or other parts of the body between the punch and the mold to avoid injury;

(5) After the operation is completed, the power supply of the equipment must be turned off, and the equipment should be cleaned and maintained.

6. Stamping equipment maintenance methods

In order to ensure the normal operation and service life of the stamping equipment, the equipment must be regularly maintained. The specific methods are as follows:

(1) Regularly check whether all parts of the equipment are normal, and deal with abnormalities in time if found;

(2) Regularly lubricate the equipment to ensure the normal operation of the transmission parts of the equipment;

(3) Regular replacement of wearing parts, such as molds, bearings, etc.;

(4) After the operation is completed, the residue on the equipment must be cleaned to keep the equipment clean.

7. Stamping equipment common faults and solutions

Stamping equipment in the use of the process may appear some common faults, the following are common faults and solutions:

(1) The punch does not act: it may be caused by the power supply is not connected or the control signal is not sent. The solution is to check that the power connection and control signal transmission are normal.

(2) Mold loose or damaged: may be due to mold installation is not firm or long-term use caused by wear and other reasons. The solution is to reinstall the mold or replace it with a new mold.

CONTACT US

Alex He

Tel:+86 15989331617

Whatsapp&Wechat:+86 15989331617

Skype ID:alex.ho43

Email: alex.he@innolead.net

Web:www.innolead.net

Hot Tags: customized stainless steel metal stamping tooling, China customized stainless steel metal stamping tooling manufacturers, suppliers, factory, Cold Forging Progressive Stamping Appliances, Sheet Metal Fabrication Stamping, Silicone Rubber Hot Stamping, Multiple Stamping Stations Bracket Parts