Stretch Blow Moulding Factory for Small Cosmetic Jars

 

Introduction to ABS plastic properties and some brands
ABS plastic - ABS resin is one of the five major synthetic resins, with excellent impact resistance, heat resistance, low temperature resistance, chemical resistance, and electrical properties. It also has the characteristics of easy processing, stable product size, good surface gloss, easy painting and coloring, and can also be used for secondary processing such as surface spraying metal, electroplating, welding, hot pressing, and bonding. It is widely used in machinery, automobiles, electronic appliances, instruments and meters Thermoplastic engineering plastics are widely used in industries such as textiles and construction.
ABS resin is currently the largest in production and most widely used polymer. It organically integrates various properties of PS, SAN, and BS, and has excellent mechanical properties that balance toughness, hardness, and rigidity. ABS is a ternary copolymer of acrylonitrile, butadiene, and styrene, with A representing acrylonitrile, B representing butadiene, and S representing styrene. ABS plastic - name
Chemical name: Acrylonitrile butadiene styrene plastic
English name Acrylonite Butadiene Styrene plastic ABS plastic - General properties
The appearance of ABS is opaque ivory colored granular material, and its products can be dyed into various colors with high glossiness. ABS has a relative density of around 1.05 and low water absorption. ABS has good adhesion with other materials, making it easy for surface printing, coating, and plating treatment. ABS has an oxygen index of 18-20 and is a flammable polymer with a yellow flame, black smoke, and a special odor. Mechanical properties
ABS has excellent mechanical properties and excellent impact strength, which can be used at extremely low temperatures; ABS has excellent wear resistance, dimensional stability, and oil resistance, making it suitable for bearings under medium loads and speeds. The creep resistance of ABS is greater than that of PSF and PC, but smaller than that of PA and POM. The bending strength and compressive strength of ABS are among the worst among plastics. The mechanical properties of ABS are greatly affected by temperature. Thermal performance
The thermal deformation temperature of ABS is 93~118 ℃, and the product can be increased by about 10 ℃ after annealing treatment. ABS still exhibits a certain degree of toughness at -40 ℃ and can be used in the temperature range of -40~100 ℃. Electrical performance
ABS has good electrical insulation and is almost unaffected by temperature, humidity, and frequency, making it suitable for use in most environments. Environmental performance
ABS is not affected by water, inorganic salts, alkalis, and various acids, but is soluble in ketones, aldehydes, and chlorinated hydrocarbons. It can undergo stress cracking due to erosion by glacial acetic acid, vegetable oil, and other substances. ABS has poor weather resistance and is prone to degradation under the action of ultraviolet light; After six months outdoors, the impact strength decreased by half. Processing performance of ABS plastic
ABS, like PS, is a thermoplastic with excellent processing performance and can be processed using universal processing methods.
ABS has better melt fluidity than PVC and PC, but worse than PE, PA, and PS, similar to POM and HIPS; The flow characteristics of ABS belong to non Newtonian fluids; The viscosity of its melt is related to both processing temperature and shear rate, but it is more sensitive to shear rate.
ABS has good thermal stability and is not prone to degradation. ABS has a high water absorption rate and should be dried before processing. The drying conditions for general products are 80~85 ℃ and 2-4 hours; The drying conditions for products with special requirements (such as electroplating) are 70~80 ℃ and 18~18 hours. ABS products are prone to internal stress during processing, and the magnitude of internal stress can be tested by immersion in glacial acetic acid; If the stress is too high and the corresponding stress cracking of the product is absolutely prohibited, annealing treatment should be carried out. The specific conditions are to be placed in a hot air circulation drying oven at 70-80 ℃ for 2-4 hours, and then cooled to room temperature.

 

 

 

Basic Information

Total Capitalization	less than US$50,000
Country / Region	China
Year Established	2014
Total Employees	100 to 149
Business Type	Exporter, Manufacturer, Trading Company

 

Trading Capabilities

Total Annual Sales	less than US$50,000
Export Percentage	90 percent to 94 percent
OEM Services	Yes
Small Orders Accepted	Yes
Brand Names	Innolead
Payment Terms	TT
Main Competitive Advantages	Experienced R&D Department, Large Product Line, ODM (Original Designing & Manufacturing), OEM Capability, Production Capacity, Reliability, Reputation
Other Competitive Advantages	NA
Major Customer	Soprano, European Thermodynamics Ltd.
Export Markets	Australasia, Central/South America, Eastern Europe, Mid East/Africa, North America, Western Europe

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTACT US

Alex He

Tel:+86 15989331617

Whatsapp&Wechat:+86 15989331617

Skype ID:alex.ho43

Email: alex.he@innolead.net

 

Web:www.innolead.net

 

Hot Tags: stretch blow moulding factory for small cosmetic jars, China stretch blow moulding factory for small cosmetic jars manufacturers, suppliers, factory, Compression Molding Plastic Injection Mold, PVC Plastic Injection Mold Making For Auto Connector, TPE Plastic Injection Mold 718h Steel Mould, Auot Radiator Plastic Tank Mold, China Manufacturer Extrusion Moulding PVC Pipes, Hot Runner Plastic Injection Mold