Pre-Drilled Aluminum Pin Fin Heat Sink

The working principle of the ice oil cooler:

一、 Structure of Ice Engine Oil Cooler

1. Cooler shell: Made of metal materials such as aluminum alloy and stainless steel, the metal plate is bent into a spiral shape using a winch and assembled into a shell. The number of cooler expansion chambers is determined by the addition of annular grooves and expansion chambers to the shell.

2. Radiator: It is the use of the heat of air to change the temperature of the engine oil to maintain a suitable temperature. The structure of the radiator generally adopts fins or conical spirals, etc., in order to increase the heat dissipation area and increase the heat dissipation efficiency.

3. Fan: used to drive the radiator and ambient air for heat exchange, ensuring that the oil quickly cools down in the cooler and sends heat out of the cooler, while also directing the air that is conducive to heat release to the inside of the cooler with the highest efficiency.

二、 Working principle of ice engine oil cooler

1. Split the oil: When the cooler device enters the necessary pressure, the spiral of the cooler

The hole will complete the separation of oil, and the oil is divided into the top and bottom flow layers of the cooler based on the pressure difference between the spiral layers of the separation. The lower end plate of the cooler provides an appropriate pressure difference, and the oil flows between the upper and lower layers of the cooler based on this pressure difference.

2. Cooling the engine oil: After passing through a finned air radiator at the top of the cooler, the heat can be blown out by the ambient fan. The temperature of the engine oil decreases as the air temperature decreases. After passing through the finned air radiator, the necessary cooling effect can be achieved. At the same time, the oil can also be heated when it comes into contact with the inner wall of the housing at the bottom of the cooler. The oil temperature depends on the working state of the environmental fan. When the environmental fan stops running, the oil temperature will change with changes in the environment.

3. Return of oil: After the cooling process is completed through the cooler, the oil will return to the inlet of the oil pump, which will transport the oil back into the circulation system.

Summary:

The ice engine oil cooler utilizes its structural characteristics to dissipate heat from the engine oil or liquid using the working principle of diversion, cooling, and reflux, ensuring that the operating temperature of the engine oil or liquid is maintained within a certain range and ensuring the normal operation of the equipment..

Basic Information

Trading Capabilities

Hot Tags: pre-drilled aluminum pin fin heat sink, China pre-drilled aluminum pin fin heat sink manufacturers, suppliers, factory, CNC ROUTER LED Extrusion Heat Sink, Round PCB Custom Aluminum Heat Sink, Pre Drilled Aluminum Pin Fin Heat Sink, Stacked Fin Heat Sink Contact Heat Pipe, Five Star Silver Heat Sink 20W For COB Light, Extruded Aluminum LED Lamp Heat Sink