Aluminum Alloy Bronze Gravity Castings

 

Company information:

1. Small details make a big difference. We promise: all parts of our company have no sharp edges. In order to facilitate assembly, all holes and screw holes are chamfered (in the absence of special instructions from the customer). Each product is carefully packed to prevent bumps and rusting in transit.

2. The process of all parts processed is strictly controlled, and each product has a process card and process chart.

3. Our quality inspection procedures are quite strict. The production process must be self-inspected, we have process inspectors and professional inspectors.

4. After the reproduction of each size of the product is completed, it must be tested one by one and provide a quality inspection report.

5. We not only have high-precision DMG five-axis linkage machining center, five-axis linkage double-spindle turning compound machining center, compound lathe, but also have more than 30 sets of Japanese and Taiwan brand processing equipment. Our inspection equipment is imported from the Japanese brand Mitutoyo, such as high-end automatic coordinate measuring machine, coordinate measuring machine, high quality height meter, roughness measurement, etc.

6. We are an enterprise integrating production and trade, industry and trade. There are currently 40 traders in the Japanese and European markets

7. Because we are closer to our factory, we can understand the actual situation of our factory, we are more professional, more reasonable and more accurate than trading companies. Our language abilities are also diverse. We can communicate in Chinese and English.

8. We have a good corporate culture and a variety of professional training programs. We hold a meeting every morning to share our work experience and grow up happily together. Our company has a strong capacity for development.

Testing equipment:

① Inspection room list:

Preparation of surface treatment of semi-finished processing parts, processing personnel during the inspection of the workpiece and finished products will be tested in the quality control room. Preparation before testing: 1. Confirm whether all the information in the drawing is correct before testing. 2. Calibration of measuring tools before testing. 3. Clean the surface of the product before testing. The inspection shall be carried out in accordance with the dimensions marked on the drawing. Qualified products are carried out the next process, and unqualified products are filled in the defective products and repaired or abandoned and remade.

②Three coordinate room at a glance:

There are three coordinate detector, tool microscope and other testing equipment in the coordinate room, and the temperature control in the room should be stricter. The workpiece before detection needs to be placed at 22-24 degrees Celsius before detection. Testing personnel need to be trained and qualified before operating this testing equipment.

③The use of a tool microscope:

For smaller custom machining service workpieces, dimensions are usually measured on a 2D plane. For example, measuring the aperture and hole distance of about Φ1, the position that the measuring tool cannot touch and the relatively fragile measuring contact surface. Using a tool microscope allows you to zoom in on local details of the product for precise measurements.

④The use of high precision automatic high measuring machines:

Process inspection and final inspection commonly used tools, easy to operate. Marble platform as the benchmark. It is usually used to measure the height of the workpiece, the overall size, the size between the faces, and the size between the center of the circle and the faces. The accuracy is about 0.005-0.01mm.

⑤The use of a three-dimensional measuring wrist:

Measurements are made on workpieces that are difficult to move, or lathe machined parts that are being machined on equipment that cannot be repeatedly clamped. When encountering products in similar situations, the measuring arm can be moved and used as long as it is fixed on a stable plane and calibrated. The function is similar to the coordinate detector, but it is more flexible.

⑥Use of ordinary measuring tools:

The most common detection method at work. Measuring tools include micrometer, inner micrometer, digital caliper, depth ruler, stopper gauge, feeler ruler, measuring block, etc. After the inspection personnel get the products to be inspected, they will carry out a full inspection according to the requirements of the drawings, and cover their own name stamp after passing the test. Finally, the inspection drawing with the name of the inspector will be sent to the customer with the product. For product quality traceability.

⑦Rockwell hardness tester:

Hardness testing is an important part of product testing. According to customer's processing requirements, if there is a need for heat treatment of the product. We will arrange the heat treatment outsourcing factory for processing. The product after heat treatment needs to be sent to the quality inspection room for hardness testing. Only after the product is qualified can the next process be processed. (In the picture, the quality inspector is testing the hardness)

 

 

 

 

Basic Information

Total Capitalization	less than US$50,000
Country / Region	China
Year Established	2014
Total Employees	100 to 149
Business Type	Exporter, Manufacturer, Trading Company

 

Trading Capabilities

Total Annual Sales	less than US$50,000
Export Percentage	90 percent to 94 percent
OEM Services	Yes
Small Orders Accepted	Yes
Brand Names	Innolead
Payment Terms	TT
Main Competitive Advantages	Experienced R&D Department, Large Product Line, ODM (Original Designing & Manufacturing), OEM Capability, Production Capacity, Reliability, Reputation
Other Competitive Advantages	NA
Major Customer	Soprano, European Thermodynamics Ltd.
Export Markets	Australasia, Central/South America, Eastern Europe, Mid East/Africa, North America, Western Europe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTACT US

Alex He

Tel:+86 15989331617

Whatsapp&Wechat:+86 15989331617

Skype ID:alex.ho43

Email: alex.he@innolead.net

 

Web:www.innolead.net

 

Hot Tags: aluminum alloy bronze gravity castings, China aluminum alloy bronze gravity castings manufacturers, suppliers, factory, Cast Aluminium Parts Aluminium Gravity Die Casting, Gravity Castings Aluminum 7075 For Aerospace Pump Auto Motorcycle Cylinder HeadIN03130, Custom Steel Metal Mould Aluminum Gravity Die Casting Automobile Engine Outlet Intake Manifold, Gravity Castings Aluminum 7075 For Aerospace Pump Auto Motorcycle Cylinder HeadOEM Custom High Press, ADC12 Aluminum Alloy Gravity Casting Aluminum Casting Prototype, Gravity Casting For Aerospace Pump Auto Motorcycle Cylinder Head Automobile Transmission Al