Hot Sale Hot Chamber Aluminium Die Casting

 

Die Casting Features

Pressure casting, also known as die casting, is a casting method in which molten alloy liquid is poured into the pressure chamber to fill the cavity of a steel mold at high speed, and the alloy liquid solidifies under pressure to form a casting. The main characteristics that differentiate die-casting from other casting methods are high pressure and high speed.

① Liquid metal fills the mold cavity under pressure and crystallizes and solidifies at higher pressures, commonly ranging from 15-100MPa.

② The metal liquid fills the mold cavity at a high speed, usually between 10-50 meters per second, and some can even exceed 80 meters per second (the linear speed of the mold cavity introduced through the inner gate - the inner gate speed). Therefore, the filling time of the metal liquid is extremely short, about 0.01-0.2 seconds (depending on the size of the casting), which can fill the mold cavity.

Die casting is a precision casting method, in which the dimensional tolerance of die castings is very small and the surface accuracy is very high. In most cases, die castings can be assembled and applied without further turning processing, and threaded parts can also be directly cast. Most small parts such as cameras, typewriters, electronic calculators, and decorations, as well as complex parts of vehicles such as cars, locomotives, and airplanes, are manufactured using die casting.

Failure form

1.damage

During die-casting production, the mold is repeatedly subjected to the action of cold and heat stimulation, causing deformation on the formed surface and its interior, which leads to repeated cyclic thermal stress. This leads to damage to the organizational structure and loss of toughness, leading to the occurrence and continued propagation of microcracks. Once the crack expands, molten metal is squeezed in, and repeated mechanical stress accelerates the crack propagation. Therefore, on the one hand, the mold must be fully preheated at the beginning of die casting. In addition, during the die-casting production process, the mold must be maintained within a certain operating temperature range to avoid early cracking and failure. At the same time, it is necessary to ensure that there are no internal issues before and during the production of the mold. In actual production, most mold failures are caused by thermal fatigue cracking.

2.fragmentation

Under the action of injection force, cracks will initiate in the weakest part of the mold, especially when the marking marks or machining marks on the mold forming surface are not polished, or small cracks will first appear at the formed corners. When there are brittle phases or coarse grains at the grain boundaries, it is easy to fracture. When brittle fracture occurs, the crack propagation is rapid, which is a very dangerous factor for the fragmentation failure of the mold. For this reason, on the one hand, any scratches, machining marks, etc. on the mold surface must be polished, even if it is in the pouring system area, it must also be polished. In addition, it is required that the mold material used has high strength, good plasticity, good impact toughness, and fracture toughness.

3.corrosion

As mentioned earlier, commonly used die-casting alloys include zinc alloy, aluminum alloy, magnesium alloy, and copper alloy, as well as pure aluminum die-casting. Zn, Al, and Mg are relatively active metal elements that have good affinity with mold materials, especially Al which is easy to bite. When the hardness of the mold is high, the corrosion resistance is good, while if there are soft spots on the formed surface, the corrosion resistance is unfavorable.

 

There are many factors that can cause mold failure, including external factors (such as high or low casting temperature, whether the mold is preheated, the amount of water spray coating, whether the tonnage of the die-casting machine matches, high die-casting pressure, too fast inner gate speed, cooling water not being opened synchronously with die-casting production, the type and composition of the casting material Fe, the size and shape of the casting, wall thickness, coating type, etc.). There are also internal factors (such as the metallurgical quality of the mold material, the forging process of the billet, the rationality of the mold structure design, the rationality of the pouring system design, the internal stress generated during the mold machine (electrical processing) processing, the heat treatment process of the mold, including various matching accuracy and smoothness requirements, etc.). If the mold experiences early failure, it is necessary to identify the internal or external causes for future improvement. However, in actual production, corrosion is only a localized part of the mold. For example, areas directly washed by the gate (core, cavity) are prone to corrosion, and areas with soft hardness are prone to aluminum alloy sticking to the mold.

 

 

 

 

Basic Information

Total Capitalization	less than US$50,000
Country / Region	China
Year Established	2014
Total Employees	100 to 149
Business Type	Exporter, Manufacturer, Trading Company

 

Trading Capabilities

Total Annual Sales	less than US$50,000
Export Percentage	90 percent to 94 percent
OEM Services	Yes
Small Orders Accepted	Yes
Brand Names	Innolead
Payment Terms	TT
Main Competitive Advantages	Experienced R&D Department, Large Product Line, ODM (Original Designing & Manufacturing), OEM Capability, Production Capacity, Reliability, Reputation
Other Competitive Advantages	NA
Major Customer	Soprano, European Thermodynamics Ltd.
Export Markets	Australasia, Central/South America, Eastern Europe, Mid East/Africa, North America, Western Europe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTACT US

Alex He

Tel:+86 15989331617

Whatsapp&Wechat:+86 15989331617

Skype ID:alex.ho43

Email: alex.he@innolead.net

 

Web:www.innolead.net

 

Hot Tags: hot sale hot chamber aluminium die casting, China hot sale hot chamber aluminium die casting manufacturers, suppliers, factory, Custom Made Aluminum Forging Parts And Die Casting Aluminum Die Casting Parts Die Casting, OEM Hardware Manufacturer Automatic Lathe Machining Parts Auto Spare Parts Precision Aluminium Die, Hot Sale Hot Chamber Aluminium Die Casting, Ornamental Metal Product Aluminum Alloy Bronze Part Mold Die Casting, Aluminum Casting, Customized Samples ADC6 Aluminum Die Casting With Black Powder Coating