Fiber Optic Handle Optical Power Meter -50~+26 DBm And 5km 1MW Visual Fault Locator Fiber Optic Cabl

Some test tools and equipment in the field of optical fiber communication are used to test and detect optical fiber optical power, jumpers, pigtails, etc. Here is a brief description of what these tools and devices do and how to use them:

1. Fiber optic power meter tester: This is a device used to measure the power of fiber signals, usually used to check the transmission quality and loss of fiber optic networks. When used, the transmitting end of the tester is connected to the transmitting end of the optical fiber to be tested, and the receiving end is connected to the receiving end of the optical fiber to be tested, and then the power value of the optical fiber signal is read through the tester.

2. High-precision cold connection tool: This is a device used to make high-precision optical fiber connections, usually used to quickly make optical fiber connections in the field. Place the optical fibers to be connected in the cold connection tool, and then connect the optical fibers together by crimping.

3. Optical failure pigtail jumper detection: This is a device used to detect optical fiber jumpers, usually used to check the quality and loss of optical fiber jumpers. When in use, the transmitting end of the tester is connected to the transmitting end of the optical fiber jumper to be measured, and the receiving end is connected to the receiving end of the optical fiber jumper to be measured, and then the loss value of the optical fiber jumper is read through the tester.

4. FC/SC tester: This is a device used to test the performance of optical fiber connectors, usually used to check the insertion loss of optical fiber connectors, return loss and other indicators. When in use, insert the optical fiber connector to be tested into the tester, and then read the value of each indicator through the tester.

These tools and devices need to pay attention to the following points when using:

1. Ensure that the test environment is clean and tidy to avoid dust and debris that may affect the test result.

2. Ensure the accuracy and reliability of the test equipment to avoid the use of inaccurate equipment resulting in distortion of the test results.

3. Strictly follow the operation procedures of the device to avoid device damage or inaccurate test results due to misoperations.

4. When using the cold connection tool to make optical fiber connections, ensure that the quality of the connection points is good to avoid problems such as poor contact.

5. When using the optical fiber jumper detection device, pay attention to the quality of the jumper to be tested and whether the connection is firm and reliable to avoid problems such as jumper breakage and short circuit.

6. When using the FC/SC tester, pay attention to whether the quality and insertion depth of the optical fiber connector to be measured are appropriate to avoid problems such as weak connection and excessive insertion loss.

Hot Tags: fiber optic handle optical power meter -50~+26 dbm and 5km 1mw visual fault locator fiber optic cabl, China fiber optic handle optical power meter -50~+26 dbm and 5km 1mw visual fault locator fiber optic cabl manufacturers, suppliers, factory