RP SMA Male To Female Pigtail WLAN Telecom RF Antenna Rg316 Coaxial Cable 30cm

Rg59+2C,Rg59 Siames,CCTV Cable0.81BC+3.7FPE+AL.FOIL+96/0.12BC+6.9PVC+2*0.5MM sq.
-Coaxial cable RG59/U
-Inner conductor:0.81mm(20AWG)or 0.643mm cuor CCS;
-Shield 1st:Bonded/Unbonded Aluminum Foil or AI/Pet/AI;
-Shield 2nd:Braid,AI ire 0.12/0.15mm/0.16mm CU or CCA;
-Jacket:6.0mm PVC,white or black
-power cable:2*0.5mm,2*0.75mm,2*1.0mm or 2*0.3mm2
-Inner Packing:cartonbox,pull out box

Composition and assembly of RF coaxial cable components

1.Introduction

RF coaxial cable components are widely used as core components in fields such as communication, television broadcasting, and radar. Its structure mainly consists of three parts: inner conductor, insulating medium, and outer conductor. This article will provide a detailed introduction to the composition and assembly process of RF coaxial cable components.

2.Composition of RF coaxial cable components

1. Inner conductor: Inner conductor is the core part of RF coaxial cable, usually composed of solid copper wire or copper tube. It is responsible for transmitting signals and typically selects based on specific frequency and impedance requirements.

2. Insulation medium: The insulation medium is located between the inner and outer conductors, responsible for isolating the inner and outer conductors to prevent signal leakage and external interference intrusion. Commonly used insulation media include polyethylene, polytetrafluoroethylene, etc.

3. Outer conductor: The outer conductor is located outside the RF coaxial cable and typically consists of a metal braided mesh or aluminum tube. It not only plays a role in protecting cables, but also effectively prevents signal radiation and external interference intrusion.

3.Assembly process of RF coaxial cable components

1. Preparation of materials: Prepare inner conductors, insulating media, outer conductors, and other necessary auxiliary materials.

2. Assembly of inner conductor: Insert the inner conductor into the insulating medium to ensure a secure connection.

3. Install the outer conductor: Cover the outer conductor with the insulating medium and the inner conductor to ensure a tight fit between them. If a metal woven mesh is used, it needs to be tightly woven to prevent signal leakage.

4. Connection: Multiple RF coaxial cable components can be connected as needed, usually using connectors or welding methods.

5. Testing: After assembly, it is necessary to test the RF coaxial cable components to ensure that their electrical performance meets the requirements.

4.Conclusion

RF coaxial cable components are an indispensable part of communication systems, and their structure and assembly process are related to the performance and stability of the system. By understanding its composition and assembly process, one can better understand its working principle and application scenarios, providing support for system design and maintenance.

Hot Tags: rp sma male to female pigtail wlan telecom rf antenna rg316 coaxial cable 30cm, China rp sma male to female pigtail wlan telecom rf antenna rg316 coaxial cable 30cm manufacturers, suppliers, factory