Description
Technical Parameters
Product Description
Main use:
Data transmission, fiber optic sensing, fiber optic lighting, fiber optic lighting, etc.
Installation process
1, lay a layer of water sand;
2. Arrange the optical fiber cables. Insert a PVC water pipe (inner diameter 2 cm) into the luminous point, cut a hole on the side of the water pipe, and insert the optical fiber through the hole on the side of the water pipe.
3, paving tile or Mosaic, leaving the water pipe position, the top of the water pipe is 6MM lower than the Mosaic plane;
4. Install the optical fiber taillight, insert the optical fiber cable into the taillight housing, tighten the screws at the rear end of the housing (fix the tight optical fiber and the housing), cut off the excess optical fiber cable, and tighten the taillight cover;
5. Fix the taillight, inject cement slurry into the PCV water pipe, and insert the taillight into the water pipe to the height of the Mosaic plane;
6, put the other end of the optical fiber into the controller.
Side-light fiber is also called whole-body light-emitting fiber, which can carry out point light, line light, and change colors at will; Soft, can be bent, modeling; Safety, energy saving, environmental protection, maintenance-free; Waterproof, UV proof; Long service life, wide range of use. The light is evenly scattered along the length of the fiber, and the halo is used to achieve the decorative effect. Because the PVC coating contains anti-ultraviolet aging substances, the side optical fiber with PVC coating is suitable for outdoor use. The use of side-light fiber can outline the outline of the object or form a variety of artistic shapes, due to its long service life, widely used to outline the outline of buildings and pools, cave lighting and corridor, stairs, underground tunnel road guidance and indoor fiber line lights (night party, KTV, hotel, shopping mall, hotel, shopping mall, etc.) Line lights and shapes in a museum or water body.



Packing and Delivery

Company Overview












Hot Tags: pmma solid end glow emitting single core plastic fiber optic cable for swimming pool christmas tree, China pmma solid end glow emitting single core plastic fiber optic cable for swimming pool christmas tree manufacturers, suppliers, factory
Overview
Quick Details
|
Place of Origin: |
Shenzhen, China (Mainland) |
Brand Name: |
Innolead |
|
Model Number: |
IN06418 |
Number of Conductors: |
1 |
|
Cable Type: |
RG59 coaxial cable |
Application: |
CATV,CCTV,Telecommunication |
|
Conductor: |
CCS. Copper |
Impedance: |
75 Ohm |
|
Shield: |
Aluminum Foil ShieldedAl-foil+braid |
Jacket: |
PVC PE |
|
Conductor Size: |
0.81mm/customized |
Insulation: |
Foam PE |
|
Length: |
100m 305m 1000ft 500m |
business type: |
OEM & ODM |
|
Certification: |
CE/ROHS/ISO9001 |
||
Plastic optical fiber is a transmission line made of polymer or organic materials, used for transmitting optical signals. Due to its high transparency, low loss, good flexibility and service life, it is considered an ideal product for modern decoration and lighting. It has significant advantages such as environmental protection, energy conservation, safety, good artistic effect, and simple maintenance.
The detailed product information is as follows:
|
Model specifications |
GFE-0.750M |
||
|
Fiber optic core material |
PMMA |
Fiber optic coating |
Fluorinated resin |
|
Loss (Db/km) |
≤ 350 (650nm) |
Numerical aperture NA |
0.75 |
|
Fiber diameter D (mm) |
0.75 |
Bending diameter (mm) |
≥8D |
|
Operating temperature (℃) |
-20~70 |
Length (m/r) |
2700 |
Send Inquiry
You Might Also Like











